10 Best Accufab Throttle Body 2026

⚡ Quick Verdict

📋 How We Evaluated

Evaluation focused on build quality signals like aluminum or reinforced housings and corrosion resistance claims. Performance considerations covered sensor inclusion, bore size, and intended behavior for idle control. Value and fitment reliability used warranty details and Amazon-style rating signals, plus user suitability by application specificity and included hardware.

Reference Numbers	04891735AC, 04891735AD, 4891735AC, 977-025
Terminal Count	6
Throttle Position Sensor Included	Yes
Includes Gasket And IAC	Yes

What We Found

A-Premium Electronic Throttle Body Compatible with Jeep, Dodge & Chrysler focuses on 2.4L and 2.0L applications across Chrysler 200, Sebring, Dodge Avenger, Caliber, and Journey, plus Jeep Compass and Patriot ranges. The listing provides multiple reference numbers such as 04891735AC, 4891735AC, and 977-025, which helps match OE parts.

A standout detail is the related parts section stating it includes a gasket, IAC, and TPS, with a six-terminal configuration. This bundled approach reduces common compatibility pain points when the vehicle expects specific supporting modules.

The listing also frames the electronic throttle assembly as helping optimize operation across conditions for better fuel economy. It warns relearn procedures may be required after installation, which remains typical for electronic throttle replacements. A one-year unlimited-mileage guarantee further supports value.

With no rating data or Prime noted, the included components become the primary differentiator for minimizing downtime.

Who It’s For

Best for owners tackling electronic throttle drivability issues on compatible 2.4L and 2.0L Jeep, Dodge, and Chrysler models listed by year. It suits DIYers or shops that want a more complete kit with gasket, IAC, and TPS in the box.

Scenarios include stalling, hesitation, rough idle, or throttle control light events tied to electronic throttle failures. The bundled components make it attractive when the original IAC or TPS setup is uncertain or when resealing is required. Buyers without time for component matching should strongly consider this kit’s all-in approach.

OE Reference Numbers	04891735AC, 4891735AD, 977-025
Material Construction	Reinforced for corrosion and heat resistance
Gasket Included	Yes
Warranty	1-Year

What We Found

Marsram Throttle Body Fit for 2007-2017 Jeep Patriot Compass, Dodge Journey targets Chrysler, Dodge, and Jeep dual-row connector variants with OE-style part numbers such as 04891735AC and 4891735AD. The assembly uses reinforced material for corrosion and heat resistance.

Marsram highlights a redesigned internal electronic sensor intended to address wear-related failures seen in older units. The package includes one electronic throttle body and one gasket, supporting cleaner swaps during replacement.

The unit supports electronic throttle control with TPS and IAC referenced as part of the system for regulating airflow and restoring efficiency. It also outlines common symptoms like stalling, failure to start, hesitation, and power surging tied to electronic throttle issues.

Marsram backs the part with a one-year warranty and advises confirming fit via Amazon confirmed fit before ordering.

Who It’s For

Best for owners replacing an electronic throttle body on compatible 2.0L and 2.4L Chrysler, Dodge, and Jeep models that use dual-row connectors. It suits DIYers comfortable verifying OE numbers like 4891735AB and confirming mounting and connector compatibility. The included gasket reduces one common expense and installation step.

Because Marsram positions the redesigned sensor for wear resistance, it fits drivers experiencing throttle control light events or idle instability. Those requiring a broader connector or part-variant coverage may prefer a more vehicle-specific kit from A-Premium.

Replacement Part Numbers	67-0014, 161193RC0A, 16119ET000, S20215
Materials	Reinforced corrosion and heat-resistant
Installation Advice	Compare received part vs original before programming
Warranty	18-Month post-purchase

What We Found

Electronic Throttle Body Assembly Fit for Nissan Cube 1.8L 09-14, NV200 2.0L 13-20, Sentra 1.8L 13-19 and other listed Nissan models uses an OE replacement focus on part number families like 67-0014 and 16119ET000.

The listing strongly instructs verifying fit with Amazon Confirmed Fit and double-checking the exact year and model. It provides a compatible vehicle matrix across Cube, NV200, Sentra, Tiida, and Versa, plus a wide reference set including 67-0020 and S20215.

The build claims emphasize corrosion and heat-resistant reinforced materials, and it states AUTOREBO match or exceed OEM specs for precision fit. Performance claims highlight quick installation, lasting reliability under extreme conditions, and engineered airflow regulation. Warranty coverage is notable: an 18-month post-purchase warranty.

The listing also recommends confirming the received part matches the original before painting or programming, reducing misinstallation risk.

Who It’s For

Best for Nissan owners replacing an electronic throttle body on listed Cube, NV200, Sentra, Tiida, and Versa applications where OE numbers in the 67-0014 or 16119ET000 family match. It fits situations where the original assembly must be compared carefully due to connector and dimension variation.

The emphasis on pre-install comparison suits mechanics and detail-oriented DIYers. The 18-month warranty offers extra protection versus shorter coverage options. It also suits buyers who prefer corrosion and heat-resistant construction claims aligned with engine-bay stress. Those with different engine variants outside the matrix should verify before purchasing.

Target Engine	3.7L and related listed 2007-2011 applications
OE Replacement Numbers	04861661AA, 04861661AB, 0280750203, 977-785
Construction	Reinforced for corrosion and heat resistance
Warranty	1-Year

What We Found

Marsram Throttle Body Compatible with 2007-2011 Dodge Jeep Ram 1500 focuses on 3.7L applications across Dakota, Durango, Nitro, Ram 1500, Jeep Commander, Grand Cherokee, Liberty, and Wrangler entries. It provides OE replacement numbers such as 04861661AA and 0280750203, which aids direct cross-referencing.

Marsram again uses reinforced material for corrosion and heat resistance, aiming to extend service life in harsh engine-bay conditions. The listing highlights a redesigned internal electronic sensor intended to improve shortcomings of older sensors that commonly fail due to excessive wear.

The assembly uses TPS and IAC system references, positioning the throttle body to regulate airflow for efficiency and performance. It also lists typical failure symptoms, including the electronic throttle control light, stalls, no-start issues, hesitation, and power surging on acceleration.

Marsram backs the replacement with a one-year warranty and directs buyers to check the Amazon confirmed fit area before ordering.

Who It’s For

Best for owners replacing electronic throttle bodies on the specified 3.7L Dakota, Durango, Nitro, Ram 1500, Jeep Commander, Grand Cherokee, Liberty, and Wrangler models. It suits shoppers who can confirm the OE number family 04861661AA or 977-785 and verify connector compatibility during ordering.

The included gasket is not stated in this feature set, so it fits better when the replacement plan includes appropriate resealing materials. It also fits drivers experiencing throttle control light triggers or stalling and hesitation symptoms related to electronic throttle wear.

Those needing broader coverage beyond 3.7L should compare against other Marsram variants tied to different connector families.

Bore Diameter	60 MM
Housing Material	Aluminum
Throttle Position Sensor Included	Yes
Target Engine	L4 1.6L Naturally Aspirated

What We Found

A-Premium Electronic Throttle Body Compatible with Hyundai & Kia & Dodge narrows compatibility to L4 1.6L naturally aspirated models for select years. It lists Dodge Attitude 2012-2014 and Hyundai Accent 2012-2019, Veloster 2012-2017, plus Kia Rio 2012-2018 and Soul 2012-2019.

The listing specifies reference numbers including 35100-2B300, 35100-2B320, and 35100-2B340 and emphasizes the L4 1.6L NA condition for correct selection. Key specs include an aluminum housing, a 60 mm bore diameter, and a throttle position sensor included. Terminal count is six and the finish is gray and black.

The packaging details mention a single unit in a box. The listing does not state inclusion of a gasket or IAC motor, so installers should confirm service parts required for their exact configuration. The one-year unlimited-mileage guarantee provides coverage.

Relearn procedures are not explicitly highlighted in this feature set, though many electronic throttle installs may still involve them.

Who It’s For

Best for drivers with an exact 1.6L naturally aspirated Hyundai Accent, Veloster, Kia Rio, Soul, or Dodge Attitude application. It fits situations where OE reference numbers in the 35100-2B300 family are available and can be cross-checked before purchase.

The inclusion of a throttle position sensor supports common sensor-related throttle control symptoms. It also works for shops that prefer aluminum housing and a defined 60mm bore selection. Those needing gasket or IAC motor included should confirm before ordering, since the listing does not clearly bundle them.

Housing Material	Aluminum
Bore Diameter	2.97 inch
Throttle Position Sensor Included	Yes
Gaskets Included	No

What We Found

A-Premium Electronic Throttle Body Compatible with Chrysler, Dodge, Jeep broadens coverage across multiple 3.6L and select trims, including Chrysler 200 and 300, Pacifica, and Town & Country, as well as Dodge and Jeep applications.

It lists extensive reference numbers, including 5184349AB through 5184349AF and 0280750570 variants, which helps when matching OE parts. The housing uses aluminum, and the listing specifies an electric throttle body with a throttle position sensor included. Terminal details list blade-style, six terminals, with a gray and black finish.

The bore diameter is 2.97 inches, which matters for airflow calibration accuracy. A major practical detail is that gaskets are not included, and the IAC inclusion status is not indicated. The company also states a one-year unlimited-mileage guarantee and notes relearn procedures may be required after installation.

Who It’s For

Best for shoppers needing one replacement source for a range of Chrysler, Dodge, and Jeep 3.6L vehicles using the specified reference numbers. It fits buyers who can verify bore diameter and terminal configuration before purchase. The inclusion of a throttle position sensor suits common sensor-related failures and should streamline installation.

However, the lack of a gasket in the box makes it better for installers who already have replacement gaskets on hand or who plan to buy one separately. Those prioritizing turnkey packaging may prefer variants that bundle gasket and IAC.

Bore Diameter	3.15 inch
Housing Material	Aluminum
Idle Air Control Motor Included	Without Idle Air Control Motor
Throttle Position Sensor Included	Yes

What We Found

A-Premium Electronic Throttle Body Compatible with Infiniti & Nissan Models spans several V6 3.5L vehicles including Infiniti FX35, G35, I35, and M35, plus Nissan Altima, Maxima, Murano, Quest, 350Z, and Pathfinder within listed model years. It offers a reference number list like 161198J100 and 977-563, supporting OE cross-checking.

The specifications call out a 3.15 inch bore diameter and a blade terminal male type with six terminals. The housing uses aluminum. Importantly, the listing states the idle air control motor is without idle air control motor, while the throttle position sensor is included.

This matters for vehicles that rely on IAC integration or where idle control components fail independently. The listing also notes relearn procedures may be required and includes a one-year unlimited-mileage guarantee. Overall, it reads like a targeted electronic throttle replacement with key electrical and bore details.

Who It’s For

Best for owners restoring drivability on specific Infiniti and Nissan V6 3.5L models with a matching OE reference number. It suits shops that already handle idle air control expectations since the IAC motor is not included.

The included throttle position sensor helps address TPS-related throttle anomalies and can simplify parts management. It also fits buyers comfortable verifying bore size and connector type before purchase using the listed 6-terminal blade style.

For people seeking a fully bundled throttle service with IAC, this kit may not offer the same completeness as other A-Premium listings.

Bore Diameter	80 mm
Throttle Position Sensor Included	Yes
Idle Air Control Motor Included	No
Gasket Included	No

What We Found

A-Premium Electronic Throttle Body Compatible with Dodge & Ram targets select Ram and Durango applications across 2005-2012 windows. It covers V8 5.7L on listed trims and provides reference numbers such as 53032801AC and 68060353AA, helping cross-reference the OE part.

The specification section calls out an 80 mm bore diameter and a blade terminal type with six terminals. The housing uses aluminum, supporting durability against engine-bay conditions.

The listing specifies that the idle air control motor is not included while the throttle position sensor is included, which affects shopping for any missing components.

It explains electronic throttle control supports optimal adjustment across operating conditions and may reduce fuel consumption, but it warns relearn procedures may be required for installation. A one-year unlimited-mileage guarantee backs the purchase. The absence of gasket inclusion is also stated, which matters for complete service readiness.

Who It’s For

Best for Ram and Durango owners replacing an electronic throttle body on the specified 5.7L applications and reference number family. It suits installers who understand that the IAC motor is not included and already plan for the correct idle air control setup.

The included throttle position sensor helps when that component drives drivability problems. Because gaskets do not ship in the box, this purchase works best for those who keep replacement gaskets available. Buyers should also budget time for possible relearn steps and verify relearn procedure needs for their vehicle.

Terminal Quantity	3
Housing Material	Aluminum
Throttle Position Sensor Included	Yes
Relearn Requirement	Factory relearn procedure required

What We Found

A-Premium Electronic Throttle Body Compatible with Ford & Lincoln targets specific trucks and SUVs, including Ford Expedition 1997-2004, F-150 1997-2003 V8 4.6L and 5.4L, and F-250 1997-1999 V8 4.6L and 5.4L, plus Lincoln Navigator 1998-1999 V8 5.4L.

The listing calls out a factory relearn procedure required, which sets expectations for post-install drivability calibration. It lists reference numbers such as 3L1Z9E926AA, F75Z9E926AA, and 67-1013, enabling cross-referencing to OE.

Specifications include a blade terminal type with a terminal quantity of three, an aluminum housing, and an included throttle position sensor. The electronic throttle assembly function notes it supports optimal adjustment for operating conditions and may reduce fuel consumption.

The listing also states relearn procedures may be required, reinforcing that installation involves more than a simple swap. A one-year unlimited-mileage guarantee backs the part. Gasket inclusion is not stated, so resealing readiness depends on the installer’s plan.

Who It’s For

Best for owners working on these older Ford and Lincoln platforms with specific 4.6L and 5.4L V8 configurations. It suits shops that can perform factory relearn procedures and confirm throttle calibration afterward. The included throttle position sensor helps when sensor failures cause unstable throttle response.

Because the terminal count is three, this option fits only when the OE configuration matches closely. DIYers without relearn capability may face extended downtime. Buyers also should plan for potential gaskets or reseal materials depending on the original vehicle hardware condition.

Target OE Number	35100-2B300
Compatible Vehicles	Hyundai Accent/Veloster, Kia Rio/Soul, Dodge Attitude (1.6L)
Verification Emphasis	Match OE numbers, dimensions, connector points
Fitment Range	2012-2019

What We Found

Electronic Throttle Body for Hyundai Kia Dodge 1.6L 35100-2B300 focuses on a narrower 1.6L application window from 2012-2019 across Hyundai Accent and Veloster, Kia Rio and Soul, and Dodge Attitude. The listing emphasizes strict OE and configuration matching, pointing to 35100-2B300 plus nearby reference numbers like 35100-2B320 and 35100-2B340.

It also instructs buyers to compare dimensions, connector or mounting points, and installation position, with professional installation recommended when fitment seems uncertain. The guidance stresses pre-install checks such as verifying connection alignment and avoiding programming or painting mismatches before install.

While details like bore diameter or materials do not appear in the provided feature set, the emphasis on procedural verification supports fewer incorrect-part outcomes. The listing also sets expectations that improper mismatch can prevent installation success or functional performance.

Who It’s For

Best for drivers with a confirmed 1.6L OE part number match who want a straightforward replacement aligned to the 35100-2B300 family. It suits mechanics and careful DIYers who can cross-check mounting and connector orientation before bolting in.

Because the listing highlights professional installation when fitment remains uncertain, it is also a good choice for shops that document part configuration. Buyers who need a broader vehicle-year range or who lack the original part on hand may struggle to verify.

This option fits most when the OE number and configuration are already known.

What to Look For Before Buying

Choosing an Accufab throttle body replacement starts with matching the exact OE reference numbers and vehicle configuration. Next, verify connector type, terminal count, and bore diameter so airflow calibration stays correct. Also check whether gasket, IAC, and TPS are included to avoid missing parts mid-repair.

Finally, plan for relearn procedures when the vehicle requires throttle adaptation.

Check Match OE Numbers And Connector Configuration

Use the OE reference number list from the listing to confirm the exact throttle body variant. Verify connector and terminal count before ordering, since similar years can differ in wiring layouts. Compare mounting points and installation position against the original part when possible.

For listings that mention “confirmed fit,” use that check, then re-check against the OE number. Avoid ordering based on engine size alone.

Value Prefer Bundled Hardware For Faster Repairs

Some replacements ship with gasket, IAC, and TPS, while others omit key items. Bundled kits reduce extra purchases and installation delays. When the listing states IAC or TPS inclusion, align that with the vehicle’s actual requirements. If a listing omits gasket, budget for the correct reseal part before starting.

Value increases when the box matches the complete service need.

Rating Use Rating Signals And Warranty Coverage

Where available, higher Amazon ratings and frequent reviews can indicate consistent fitment and longevity. If ratings are missing, focus on warranty duration and clarity of coverage. A longer warranty like 18 months can add confidence when evidence signals are limited.

Also assess whether the listing clearly documents relearn requirements and specs. Transparent listings usually reduce buyer errors and returns.

Verify Account For Relearn And Installation Workflow

Many electronic throttle bodies require relearn procedures to restore idle and throttle response. Verify the listing guidance and match it to the vehicle model’s service manual expectations. Plan for the needed scan tool or shop labor if relearn is required.

Compare the received part to the original before programming, painting, or final install. A smooth workflow prevents drivability issues after replacement.

Frequently Asked Questions

How can compatibility checks prevent buying the wrong electronic throttle body?

Verify the exact OE reference number family listed for the vehicle. Also confirm connector style and terminal count, because similar engines can use different harness layouts. Use Amazon Confirmed Fit when offered, then compare mounting and dimensions to the original part.

If fitment looks uncertain, professional installation helps ensure correct seating and electrical connection.

Do electronic throttle body replacements always require a relearn procedure?

Many vehicles need an adaptation or relearn after throttle replacement. Some listings explicitly mention factory relearn procedures or relearn requirements. If the vehicle shows idle instability or throttle learning faults after installation, relearn steps usually resolve the issue. Always follow the factory procedure for that model year.

What parts should be included with the throttle body for a complete repair?

Some kits include only the throttle body plus TPS, while others bundle gasket and IAC. The best approach matches your vehicle’s expected components and the listing’s stated inclusions. Missing gaskets can cause air leaks and drivability problems.

Missing IAC components can create idle control issues, even if the throttle body itself is correct.

Which specifications matter most when comparing throttle body listings?

Bore diameter, terminal count, and connector type matter because they affect airflow and electrical compatibility. Aluminum or reinforced housing claims relate to durability under heat and corrosion. Included sensor types, like TPS, also influence whether extra parts are needed. Always prioritize OE references and configuration details over generic engine descriptions.

What drivability symptoms point to an electronic throttle body failure?

Common indicators include throttle control warning lights, stalling, no-start conditions, hesitation, and power surging during acceleration. Rough idle and inconsistent response often accompany sensor or throttle control failures. However, similar symptoms can come from vacuum leaks or sensor faults, so diagnostic confirmation helps.

After replacing, ensure the vehicle performs the required adaptation steps.

🎯 Final Verdict

A-Premium Electronic Throttle Body Compatible with Jeep, Dodge & Chrysler earns the top pick for including gasket, IAC, and TPS together, which lowers installation friction for compatible 2.4L/2.0L setups. That completeness is a major advantage over throttle bodies that ship without reseal materials or supporting components.

As an alternative, Marsram offers reinforced construction and an included gasket for certain dual-row connector applications. Confirm OE reference numbers and connector layout, then proceed with the relearn plan if required.